- Introduction
- Mainfeature
- Application&scenarios
- Specification
- Parts/Warranty
-
20W GSM900MHz Air Coupling Frequency Shifting Repeater is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).
As per the method of receiving BTS signal by the Donor Unit, two types of FSR are available:
1. Cable-Access FSR: To receive BTS signal via a direct coupler closed to the BTS (Recommended);
2. Wireless-Access FSR: The receive BTS signal via a Donor Antenna (applicable when no line of sight can be viewed between the Donor Unit and Remote Unit as the Donor Unit is installed on the BTS tower).
And both types of FSR can be sorted into 2 sub-categories as per the availability of link frequency:
1. In-band FSR: The link frequency is within the working band of BTS;
2. Out-of-Band FSR: The link frequency is out of the working band of BTS.
- Mainfeature
-
Main Features
1. High isolation full duplex design, easy to install.
2. Low noise figure, high receive sensitivity.
3. With ALC and MLC function to ensure stable output power.
4. Low power consumption, environmental protection and energy saving.
5. Modular structure design, easily to upgrade the system.
6. High Q cavity filter and SAW surface acoustic wave filter, high out of band rejection.
7. Adopt the world’s most advanced high linearity, low intermodulation LDMOS power amplifier.
8. Adopt the advanced digital PLL, TCXO, OCXO technology, frequency stability and high accuracy.
9. Perfect remote and local network monitoring function.
10. Waterproof design work for all weather indoor and outdoor.
- Application&scenarios
-
Frequency shifting repeater Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
And can meet the requirement of antenna isolation to avoid self‐oscillation.
- Specification
-
Donor Unit Specification:
Items
Testing Condition
Specification
Uplink
Downlink
Working Frequency(MHz)
Nominal Frequency
890-915MHz
935-960MHz
Frequency Range(MHz)
Nominal Frequency
1.5G or 1.8G
Gain(dB)
Nominal Output Power-5dB
50±3(Station Couple)
>80(Air Receive)
Output Power (dBm)
GSM modulating signal
0(Station Couple)
37
33(Air Receive)
37
ALC (dBm)
Input Signal add 20dB
△Po≤±1
Noise Figure (dB)
Working in-band(Max. Gain)
≤5
Ripple in-band (dB)
Nominal Output Power -5dB
≤3
Frequency Tolerance (ppm)
Nominal Output Power
≤0.05
Time Delay (us)
Working in-band
≤5
Peak Phase Error(°)
Working in-band
≤20
RMS Phase Error (°)
Working in-band
≤5
Gain Adjustment Step (dB)
Nominal Output Power -5dB
1dB
Gain Adjustment Range(dB)
Nominal Output Power -5dB
≥30
Gain Adjustable Linear(dB)
10dB
Nominal Output Power -5dB
±1.0
20dB
Nominal Output Power -5dB
±1.0
30dB
Nominal Output Power -5dB
±1.5
Inter-modulation Attenuation (dBc)
Working in-band
≤-45
Spurious Emission(dBm)
9kHz-1GHz
BW:30KHz
≤-36
≤-36
1GHz-12.75GHz
BW:30KHz
≤-30
≤-30
VSWR
BS/MS Port
1.5
I/O Port
N-Female
Impedance
50ohm
Operating Temperature
-25°C ~+55°C
Relative Humidity
Max. 95%
MTBF
Min. 100000 hours
Power Supply
DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
Remote Unit Specification:
Items
Testing Condition
Specification
Uplink
Downlink
Working Frequency(MHz)
Nominal Frequency
890-915MHz
935-960MHz
Frequency Range(MHz)
Nominal Frequency
1.5G or 1.8G
Gain(dB)
Nominal Output Power-5dB
95±3
Output Power (dBm)
GSM modulating signal
37
43
ALC (dBm)
Input Signal add 20dB
△Po≤±1
Noise Figure (dB)
Working in-band(Max. Gain)
≤5
Ripple in-band (dB)
Nominal Output Power -5dB
≤3
Frequency Tolerance (ppm)
Nominal Output Power
≤0.05
Time Delay (us)
Working in-band
≤5
Peak Phase Error(°)
Working in-band
≤20
RMS Phase Error (°)
Working in-band
≤5
Gain Adjustment Step (dB)
Nominal Output Power -5dB
1dB
Gain Adjustment Range(dB)
Nominal Output Power -5dB
≥30
Gain Adjustable Linear(dB)
10dB
Nominal Output Power -5dB
±1.0
20dB
Nominal Output Power -5dB
±1.0
30dB
Nominal Output Power -5dB
±1.5
Inter-modulation Attenuation (dBc)
Working in-band
≤-45
Spurious Emission(dBm)
9kHz-1GHz
BW:30KHz
≤-36
≤-36
1GHz-12.75GHz
BW:30KHz
≤-30
≤-30
VSWR
BS/MS Port
1.5
I/O Port
N-Female
Impedance
50ohm
Operating Temperature
-25°C ~+55°C
Relative Humidity
Max. 95%
MTBF
Min. 100000 hours
Power Supply
DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
- Parts/Warranty
-
12months for repeater6months for accessories
■ contat supplier ■ Solution&Application
-
*Model :
*Product Category : Product 10 -
*Model : KT-GW20
*Product Category : Low price 2100mhz wcdma repeater mobile signal booster amplificador celular -
*Model : KT-99P
*Product Category : Cell Phone Signal Amplifier 2G 3G 4G Tri Band Signal Booster Cellular Repeater 900 1800 2100 MHz Mobile Signal Booster -
*Model : KT-RS900/1800-B25/25-P43B
*Product Category : 20W 43dbm GSM900MHz Air Coupling Frequency Shifting Repeater
-