product_bg

20Watt 43dbm umts 3g 2100MHz cell phone signal booster Repeaters

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mo...


Product Detail

Product Tags

  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Mainfeature

umts 3g 2100 repeater Features:
1,High linearity PA; High system gain;
2,Intelligent ALC technology;
3,Full duplex and high isolation from uplink to downlink;
4,Automatic Operation convenient operation;
5,Integrated technique with reliable performance;
6,Local and remote monitoring (optional) with automatic fault alarm &remote control;
7,Weatherproof design for all-weather installation;

Application&scenarios

3G UMTS WCDMA REPEATER Applications
    To expand signal coverage of fill signal blind area where signal is weak  
or unavailable.
   Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
   Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
    The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
    And can meet the requirement of antenna isolation to avoid self‐oscillation.

  width=

 width= 

 

Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

1920 – 1980MHz

2110 – 2170MHz

Gain(dB)

Nominal Output Power-5dB

95±3

Output Power (dBm)

GSM modulating signal

37

43

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤2.0 (3.84MHz)

Time Delay (us)

Working in-band

≤5

EVM(%)

Working in-band

≤12.5

PCDE (dB)

Working in-band

≤35

ACLR(dBc)

±5MHz

Working in-band

≥-45

±10MHz

Working in-band

≥-50

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty
12months for repeater ,.6months for accessories

■ contat supplier ■ Solution&Application

  • *Model : KTWTD-15090-1.2V
    *Product Category : (1100-1300MHz) 90 °-15dBi panel antenna

  • *Model : KT-100-03
    *Product Category : 100W RF Coaxial Attenuator

  • *Model : GI098515WI218518
    *Product Category : GSM900+WCDMA2100 Pico ICS Repeater

  • *Model : KT-DRP-B75-P37-B
    *Product Category : 5W DCS1800MHz Band Selective Repeaters


  • Previous:
  • Next: