- Introduction
- Mainfeature
- Application&scenarios
- Specification
- Parts/Warranty
-
40GSM900/DCS1800/WCDMA2100 2W Band Selective Repeaters(KT-G/D/WRP-B25/75/60-P33-B)
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
- Mainfeature
-
Main Features
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;
- Application&scenarios
-
GSM900/DCS1800/WCDMA2100 tri-band 2W Band Selective Repeater Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
And can meet the requirement of antenna isolation to avoid self‐oscillation.
- Specification
-
Technical Specifications
Items
Testing Condition
Specification
Uplink
Downlink
Working Frequency(MHz)
Nominal Frequency
890 – 915MHz
935 – 960MHz
1710 – 1785MHz
1805 – 1880MHz
1920 – 1980MHz
2110 – 2170MHz
Gain(dB)
Nominal Output Power-5dB
Max.90±3
Output Power (dBm)
WCDMA modulating signal
33
33
ALC (dBm)
Input Signal add 20dB
△Po≤±1
Noise Figure (dB)
Working in-band(Max. Gain)
≤5
Ripple in-band (dB)
Nominal Output Power -5dB
≤3
Frequency Tolerance (ppm)
Nominal Output Power
≤0.05
Time Delay (us)
Working in-band
≤5
EVM(%)
Working in-band
≤12.5
PCDE (dB)
Working in-band
≤35
Gain Adjustment Step (dB)
Nominal Output Power -5dB
1dB
Gain Adjustment Range(dB)
Nominal Output Power -5dB
≥30
Gain Adjustable Linear(dB)
10dB
Nominal Output Power -5dB
±1.0
20dB
Nominal Output Power -5dB
±1.0
30dB
Nominal Output Power -5dB
±1.5
Inter-modulation Attenuation (dBc)
(GSM/DCS)
Working in-band
≤-45
ACPR(dBc)
±5.0
(WCDMA)
Working in-band
≤-45
±10.0
Working in-band
≤-50
Spurious Emission(dBm)
9kHz-1GHz
BW:30KHz
≤-36
≤-36
1GHz-12.75GHz
BW:30KHz
≤-30
≤-30
VSWR
BS/MS Port
1.5
I/O Port
N-Female
Impedance
50ohm
Operating Temperature
-25°C ~+55°C
Relative Humidity
Max. 95%
MTBF
Min. 100000 hours
Power Supply
DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
- Parts/Warranty
-
01 year warranty,6months for accessories
■ contat supplier ■ Solution&Application
-
*Model : KT-VHF UHF
*Product Category : VHF uhf walkie talkie repeater Amplifier -
*Model :
*Product Category : UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems -
*Model : KTWTD-13090-08V / KTWTD-13090-09V
*Product Category : 90 °-13.5dBi base plate directional antenna (824-960MHz) -
*Model : KT-CPS-827-03
*Product Category : 800-2700 MHz 3-Way Cavity Splitter
-