- Introduction
- Mainfeature
- Application&scenarios
- Specification
- Parts/Warranty
-
LTE Band VII 2W Band Selective Repeaters(KT-LRP-B70-P33-VII)
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
- Mainfeature
-
Cellular repeater Main Features:
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;
- Application&scenarios
-
Cellular repeater Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;And can meet the requirement of antenna isolation to avoid self‐oscillation.
- Specification
-
Technical Specifications
Items
Testing Condition
Specification
MEMO
Uplink
Downlink
Working Frequency(MHz)
Nominal Frequency
2500 – 2570 MHz
2620 – 2690 MHz
LTE
Gain(dB)
Nominal Output Power-5dB
90±3
Output Power (dBm)
GSM modulating signal
30
33
ALC (dBm)
Input Signal add 20dB
△Po≤±1
Noise Figure (dB)
Working in-band(Max. Gain)
≤5
Ripple in-band (dB)
Nominal Output Power -5dB
≤3
Frequency Tolerance (ppm)
Nominal Output Power
≤0.05
Time Delay (us)
Working in-band
≤5
ACLR
Working in-band
Compatible with 3GPP TS 36.143 and 3GPP TS 36.106
For LTE, PAR=8
Spectrum Mask
Working in-band
Compatible with 3GPP TS 36.143 and 3GPP TS 36.106
For LTE, PAR=8
Gain Adjustment Step (dB)
Nominal Output Power -5dB
1dB
Gain Adjustment Range(dB)
Nominal Output Power -5dB
≥30
Gain Adjustable Linear(dB)
10dB
Nominal Output Power -5dB
±1.0
20dB
Nominal Output Power -5dB
±1.0
30dB
Nominal Output Power -5dB
±1.5
Spurious Emission(dBm)
9kHz-1GHz
BW:30KHz
≤-36
≤-36
1GHz-12.75GHz
BW:30KHz
≤-30
≤-30
VSWR
BS/MS Port
1.5
I/O Port
N-Female
Impedance
50ohm
Operating Temperature
-25°C ~+55°C
Relative Humidity
Max. 95%
MTBF
Min. 100000 hours
Power Supply
DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
- Parts/Warranty
-
12 month warranty for repeater equipment ,
6months for accessories of repeater■ contat supplier ■ Solution&Application
-
*Model : KT-PRP-B60-P33-B
*Product Category : 2W PCS 1900 MHz 2g 3g band selective cell signal repeater -
*Model : KT-G/D/WRP-B25/75/60-P37-B
*Product Category : 37dBm gsm900 1800 2100 triple band 2g 3g Band Selective Repeaters -
*Model : KT-TRP-B15-P45-B
*Product Category : 30W Tetra800MHz Band Selective Repeaters -
*Model : KTWTD-15065-08S /KTWTD-15065-09S
*Product Category : 65 °-15dBi dual-polarized flat panel directional antenna base station (824-960MHz)
-