40dBm 10W IDEN800 long distance Booster Band Selective Repeater

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty IDEN800 10W Band Selective Repeaters（KT-IRP-B15-P40-B） KingtoneRepeaters system is designed to solve problems of weak mobile signal, which ismuch cheaper than adding a new Base Station (BTS). Main operation of RFRepeaters system is to receive low‐power signal from BTS via radio frequencytransmission and then transmit the amplified signal to the areas where networkcoverage is inadequat...

Send email to us Download as PDF

Product Detail

Product Tags

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

IDEN800 10W Band Selective Repeaters（KT-IRP-B15-P40-B）

KingtoneRepeaters system is designed to solve problems of weak mobile signal, which ismuch cheaper than adding a new Base Station (BTS). Main operation of RFRepeaters system is to receive low‐power signal from BTS via radio frequencytransmission and then transmit the amplified signal to the areas where networkcoverage is inadequate. And the mobile signal is also amplified and transmittedto the BTS via the opposite direction.

Mainfeature

Main Features

◇ High linearity PA; High system gain

◇ Intelligent ALC technology

◇ Full duplex and high isolation

◇ Sharp filter curve

◇ Automatic Operation convenient operation

◇ Modular design ease to maintain

◇ Remote control/monitor/alarm via RF MODEM or Ethernet

◇ IP65 chassis design for both indoor and outdoor application

Application&scenarios

Applications

To expand signal coverage of fill signal blind area where signal is weak or unavailable. Outdoor: Airport, Tourism Region, Golf Course, Tunnel, Factory, Mining District, Village etc. Indoor: Hotel, Exhibition Center, Basement, Shopping Mall, Office, Packing Lot etc. It is mainly applicable to such case: The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm; And can meet the requirement of antenna isolation to avoid self‐oscillation.

Specification

Technical Specifications

Items		Testing Condition	Specification		Meno
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	806– 821MHz	851 – 866MHz
Bandwidth		Nominal Band	15MHz
Gain(dB)		Nominal Output Power-5dB	95±3
Output Power (dBm)		GSM modulating signal	33	40
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Out of Band Gain	±400KHz	Nominal Output Power -5dB	65
	±600KHz	Nominal Output Power -5dB	55
	±1MHz	Nominal Output Power -5dB	45
	±5MHz	Nominal Output Power -5dB	35
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty

warranty :1year for repeater ,6months for accessories

■ contat supplier ■ Solution&Application

*Model : KT-RS900/1800-B25/25-P40B
*Product Category : 10W GSM900MHz Air Coupling Frequency Shifting wireless Repeater
*Model : KT-IRP-B15-P27-B
*Product Category : 27dBm IDEN800 Band Selective Repeater
*Model : LISI218518/LISI188518
*Product Category : LTE FDD Pico ICS Repeater
*Model :
*Product Category : 120 °-14dBi directional antenna base plate (824-960MHz)