Frequency 800MHz + 900MHz + 1800MHz + 2100MHz + 2600MHz:
Frequency Range(LTE Band20 800Mhz 4G):UL:832~862mhz;DL:791~821mhz ;
Frequency Range(GSM 900):(Upload:890~915mhz, Download 935~960mhz) ;
Frequency Range(DCS1800): UL:1710~1785mhz;DL:1805~1880mhz;
Frequency Range(WCDMA 2100): UL:1920~1980mhz;DL:2110~2170mhz;
Frequency Range(LTE Band7 2600 4g ): UL:2500~2570mhz;DL:2620~2690mhz;
- work band :
BNAD 20 for 4G LTE+ data
BAND 8 for 2G GSM 2G voice
BAND 3 for 4G LTE data
BAND 1 for 3G wcdma UMTS
BAND 7 for 4G LTE+ high speed data
- Gain:70dB.
- Coverage:300~500 Square Meters
Features:
1,Support of ALL networks and most carriers worldwide.
2,LCD display with essential technical data, including working band, maximum gain, signal strength and alarm indicator.
3,Network Safe option that turns down the booster for protecting the mobile network in case of unpredictable issues.
4,The ability to reduce the level of radiation emitted by your phone.
5,Simple and fast installation that requires no more than 30 minutes.
FAQ
Question: Input signal weak.
Solution 1: Face to base station.
Solution 2:Rising up outdoor antenna.
Solution 3:Avoid obstacles.
Question:The antenna isolatuon become worse.
Solution:The device is on the adjusting. Please waiting for moment…
Question:Receive and Relay antennas distance too close.
Solution: Let the antennas be far away from 15 meters,and re-turn the power.
Question:Isolation degree is not enough.
Solution 1:Pull the antenna.
Solution 2:Elevated antenna.
Solution 3:Partition in the middle.
How to install the Five-band Network booster?
1. Install the outdoor antenna on the roof, Face to signal tower.
2. Connects one end of 10-15 meters Coaxial Cable with outdoor antenna.
3. Run the coaxial cable into room, connects the other end of cable with “BTS” end of repeater host.
4. Connect indoor antenna with “MS” end of repeater host.
5. Mount the indoor antenna on wall.
6. Power up and it is done. Cellphone signal would be full bars in moment.