China High Quality Customized 136-174MHz VHF Band Selective Bi-directional Amplifiers (BDA)
1. High isolation full duplex design, easy to install.
2. Low noise figure, high receive sensitivity.
3. With ALC and MLC function to ensure stable output power.
4. Low power consumption, environmental protection and energy saving.
5. Modular structure design, easily to upgrade the system.
6. High Q cavity filter and SAW surface acoustic wave filter, high out of band rejection.
7. Adopt the world’s most advanced high linearity, low intermodulation LDMOS power amplifier.
8. Adopt the advanced digital PLL, TCXO, OCXO technology, frequency stability and high accuracy.
9. Perfect remote and local network monitoring function.
10. Waterproof design work for all weather indoor and outdoor.
Two Cabinets Design of BDA for client’s option
What’s Bi-Directional Amplifier BDA?
A Bi-Directional Amplifier (or BDA) is used for On-Site radio coverage enhancement of RF signals in buildings, tunnels or areas that are shaded. BDA ‘s have a few components: A donor antenna collects signal from the rooftop where it is strong and delivers it to the BDA for amplification. The amplified signal is delivered to one or more distribution antennas in areas which have poor coverage. BDAs are available in many specific bands: VHF, UHF, 700MHz, 800MHz, and cellular/LTE etc.
Most places have some signal, just not in all the areas required on site. For example, a hotel may have signal on the upper floors, but not in the parkade. To provide signal into the parkade, we would install an antenna to pick up signal from the cell site or repeater from working areas, feed it to the amplifier then off to more antennas located near the areas with deficient coverage. coverage.
Technical Specifications
Items | Uplink | Downlink | ||
Working Frequency (customizable) | F1-F2MHzWithin 110-175MHz | F3-F4 MHzWithin 110-175MHz | ||
Passband BW | ≤5MHz | |||
Guard band(F3-F2) | ≥5MHz | |||
Max. Input Level (Non-Destructive) | -10dBm | |||
Max. Output Power (customizable) | +0dBm | +37dBm | ||
Max. Gain | 45dB | 45dB | ||
Input Sensitivity | ≥-110dBm | ≥-40dBm | ||
Passband ripple +/- 2.0 dB | +/- 2.0 dB | |||
Gain Adjustment Range | 1~31dB @ step of 1dB | |||
Auto Level Control (ALC) | >30dB | |||
Voltage Standing Wave Ratio (VSWR) | ≤ 1.5 | |||
Noise Figure@Max Gain | ≤ 5dB | |||
Frequency Error | ≤ +/-1.35kHz | |||
Frequency Deviation | ≤ +/-2.5kHz | |||
Adjacent Channel Power | ≤-60dBc | |||
Altemate Channel Power | ≤-60dBc | |||
Spurious Emission | Within working band | ≤ -36dBm/30kHz | ||
Out of working band | 9kHz~1GHz: ≤ -36dBm/30kHz 1GHz: ≤ -30dBm/30kHz | |||
Group Delay | ≤ 1uS | |||
Maximum input power, no damage | +5dBm | |||
I/O Impedance | 50Ω | |||
RF Connector | N-Type (Female) / changeable / bottom of casing | |||
Self diagnostic platform | Microprocessor based | |
Local management and supervising | Local access via Ethernet | |
Remote management and supervising | Remote access via Ethernet or wireless modem, option KT-RC2G | |
RoHS compliance | YES | |
Housing | IP67 / NEMA4X | |
Temperature Range | -13º to 131º F • -25º to +55º C | |
Relative Humidity Range | ≤ 95% (non condensing) | |
Power Supply (customizable) | DC 24V/DC 48V / AC 220V, 50/60Hz/110VAC, 50/60 Hz | |
Backup Power Supply (optional) | 4 hours | |
Cooling | Natural convection | |
Housing | IP67 / NEMA4X | |
Mounting | Wall or pole mounting | |
MTBF | 50.000 hours | |
Dimensions | 52*45*23cm | |
Weight | ≤ 30kg |