Kingtone system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Main Features:
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;
Technical Specification:
Item | Kingtone Dual Band Signal Repeater GSM 2G 3G 4G LTE Networking System Cellular Booster High Power 20W 850/1900MHz Repeater | ||
Frequency Range | Uplink | 824-849MHz / 1850-1910MHz | |
Downlink | 869-894MHz / 1930-1990MHz | ||
Output
Power |
Uplink | +37dBm | |
Downlink | +43dBm | ||
Working Bandwidth | Various bandwidth is available upon request | ||
Gain | Min. 90dB | ||
Gain Control Range | 31dB (1dB Step) | ||
VSWR | < 1.5 | ||
Ripple in Band | Max +/- 1.5dB | ||
Spurious
Emissions |
9KHz-1GHz | Max -36dBm | |
1GHz-12.75GHz | Max -30dBm | ||
ACPR | ≤-45dBc | ||
≤-55dBc | |||
RF Connector | N-type Female | ||
I/O Impedance | 50 ohm | ||
Noise Figure | Max 5dB | ||
Group Time Delay | Max 5µS | ||
Temperature Range | -25 degree Celsius to +55 degree Celsius | ||
Relative Humidity | Max 95% | ||
MTBF | Min. 100000 hrs | ||
Power Supply | DC -48V / AC220V (+/-15%), 50Hz | ||
UPS Backup Power Supply (Optional) | 6 hours / 8 hours | ||
Power Consumption | Max 250W | ||
NMS Monitor Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR,
Output Power, Gain, Uplink ATT, Downlink ATT and etc. |
||
Remote Control Module (Optional) | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
|