English
product_bg

Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone

Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone Featured Image
  • Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS vi...


Download as PDF

Product Detail

Product Tags

Related Video

Feedback (2)

Adhering into the principle of "quality, provider, performance and growth", we now have gained trusts and praises from domestic and intercontinental consumer for Mi Home Wifi Repeater , Buy Signal Booster , Nanostation Repeater , It can be our wonderful honor to meet your requires.We sincerely hope we can cooperate along with you inside the around long term.
Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone Detail:

  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Mainfeature

Main Features
◇ High linearity PA; High system gain
◇ Intelligent ALC technology
◇ Full duplex and high isolation
◇ Sharp filter curve
◇ Automatic Operation convenient operation
◇ Modular design ease to maintain
◇ Remote control/monitor/alarm via RF MODEM or Ethernet
◇ IP65 chassis design for both indoor and outdoor application

Application&scenarios
 gsm 850Mhz wireless repeater Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
And can meet the requirement of antenna isolation to avoid self‐oscillation.
  width=
width=
Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

824 – 849MHz

869 – 894MHz

Gain(dB)

Nominal Output Power-5dB

90±3

Output Power (dBm)

GSM modulating signal

33

33

ALC (dBm)

Input Signal add 20dB

△Po≤±1

Noise Figure (dB)

Working in-band（Max. Gain）

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
Parts/Warranty
12months warranty for repeater . 6months for accessories

■ contat supplier ■ Solution&Application

  • *Model : KT-CRP-B25-P45-B
    *Product Category : 30W CDMA800MHz High Power Amplifier Long Distance Coverage Outdoor Booster Band Selective Repeaters

  • *Model : KT-CPS-400-03
    *Product Category : 400-470MHz 3 Way Cavity Splitter

  • *Model :
    *Product Category : Yagi Antenna

  • *Model : KT-4G27-2600
    *Product Category : lte repeater band4 network booster 4g mobile signal booster 2600

Product detail pictures:

Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone detail pictures

Related Product Guide:
What is MIMO?
The corporate keeps towards the operation concept "scientific administration, superior quality and performance primacy, client supreme for Manufacturer for Static Mobile Phone Repeaters For Indoor Use - 2W CDMA800MHz broad band wireless Repeater – Kingtone, The product will supply to all over the world, such as: Manchester, Angola, Saudi Arabia, The credibility is the priority, and the service is the vitality. We promise we have now the ability to offer excellent quality and reasonable price items for customers. With us, your safety is guaranteed.
    • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By EliecerJimenez from Victoria - 2017.10.23 10:29
    The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
    5 Stars By Gabrielle from Cairo - 2017.09.28 18:29

    RELATED PRODUCTS