Professional China Cell Phone Repeater Tower - 37dbm 5W GSM850Mhz cell phone signal Band Selective Repeater – Kingtone Detail:
- Introduction
- Mainfeature
- Application&scenarios
- Specification
- Parts/Warranty
-
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
- Mainfeature
-
Main Features
◇ High linearity PA; High system gain
◇ Intelligent ALC technology
◇ Full duplex and high isolation
◇ Sharp filter curve
◇ Automatic Operation convenient operation
◇ Modular design ease to maintain
◇ Remote control/monitor/alarm via RF MODEM or Ethernet
◇ IP65 chassis design for both indoor and outdoor application
- Application&scenarios
-
GSM 850 REPEATER Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
And can meet the requirement of antenna isolation to avoid self‐oscillation.
- Specification
-
Items
Testing Condition
Specification
Uplink
Downlink
Working Frequency(MHz)
Nominal Frequency
824 – 849MHz
869 – 894MHz
Gain(dB)
Nominal Output Power-5dB
95±3
Output Power (dBm)
GSM modulating signal
33
37
ALC (dBm)
Input Signal add 20dB
△Po≤±1
Noise Figure (dB)
Working in-band（Max. Gain）
≤5
Ripple in-band (dB)
Nominal Output Power -5dB
≤3
Frequency Tolerance (ppm)
Nominal Output Power
≤0.05
Time Delay (us)
Working in-band
≤5
Peak Phase Error(°)
Working in-band
≤20
RMS Phase Error (°)
Working in-band
≤5
Gain Adjustment Step (dB)
Nominal Output Power -5dB
1dB
Gain Adjustment Range(dB)
Nominal Output Power -5dB
≥30
Gain Adjustable Linear(dB)
10dB
Nominal Output Power -5dB
±1.0
20dB
Nominal Output Power -5dB
±1.0
30dB
Nominal Output Power -5dB
±1.5
Inter-modulation Attenuation (dBc)
Working in-band
≤-45
Spurious Emission(dBm)
9kHz-1GHz
BW:30KHz
≤-36
≤-36
1GHz-12.75GHz
BW:30KHz
≤-30
≤-30
VSWR
BS/MS Port
1.5
I/O Port
N-Female
Impedance
50ohm
Operating Temperature
-25°C ~+55°C
Relative Humidity
Max. 95%
MTBF
Min. 100000 hours
Power Supply
DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Modul
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
- Parts/Warranty
-
12months for repeate r,6months for accessories
■ contat supplier ■ Solution&Application
-
*Model : KT-900 ICS Repeater
*Product Category : 10W GSM 900 ICS Wireless cell phone signal Repeater
-
*Model : KT-WRP-B60-P37-B
*Product Category : 5W 37dbm Ourdoor 3g booster 2100mhz umts wcdma cell phone cellular repeater 3g band selective repeater -
*Model : KT-RS900/1800-B25/25-P40B
*Product Category : 10W GSM900MHz Air Coupling Frequency Shifting wireless Repeater -
*Model : TDD 4G LTE Repeater
*Product Category : 24dBm TDD-LTE 4G Digital wireless cellular pico repeater booster amplifier
-
Product detail pictures:
Related Product Guide:
What is MIMO?
Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for Professional China Cell Phone Repeater Tower - 37dbm 5W GSM850Mhz cell phone signal Band Selective Repeater – Kingtone, The product will supply to all over the world, such as: Guinea, Romania, New Orleans, We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.
By Pearl Permewan from Albania - 2018.09.16 11:31
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Iris from Hungary - 2018.09.16 11:31
-
professional factory for Proutone Signal Booste...
-
China Manufacturer for High Gain Lte Yagi Anten...
-
Online Exporter Mimo Antenna 18dbi - gsm boost...
-
Original Factory O2 Phone Signal Booster - Low...
-
Wholesale Best Handheld Vhf Radio - Baofeng UV...
-
OEM China 4g Signal Booster For Car - 5 Band S...