Reasonable price Signal Booster Repeater 4g Lte - Cost-effective Band Selective Fibre Optical Repeater VHF, UHF,TETRA BDA (DAS) for in-building wireless radio coverage – Kingtone

Short Description:

TETRA Fiber Optical repeaters consist of Master Unit (MU) and Remote Unit (RU). One Master Unit can work together with 1 to 4 Remote Units. The Master Unit transfers the BTS signal into optical signal and transmits the optical signal to the Remote Unit (RU). The Remote Unit (RU) transfer the optical signal into RF signal, amplify the RF signal and cover the target areas. The optical remote unit (RU) is connected to a master unit via optical fiber. The BTS signals are interfaced to the maste...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for Mobil Signal Booster Cell Phone , Att Cell Repeater , T Mobile Cellspot Repeater , We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence.

Reasonable price Signal Booster Repeater 4g Lte - Cost-effective Band Selective Fibre Optical Repeater VHF, UHF,TETRA BDA (DAS) for in-building wireless radio coverage – Kingtone Detail:

The optical remote unit (RU) is connected to a master unit via optical fiber. The BTS signals are interfaced to the master unit for electrical/optical conversion. These converted signals are transmitted via optical fiber to the remote units and finally to the antenna. By utilizing optical fiber cables, high attenuation losses on long coaxial cables are avoided.
This increases the potential distance between remote unit and master unit up to 20 km. A subcarrier is fed into the signal path on the optical fiber to act as a remote control and supervision channel for all equipment. Due to the modular concept later expansion and upgrade is possible. System redundancy can also be provided at low cost impact.

• Cost-effective indoor cell enhancer
• Easy installation due to small dimensions and auto-gain functionality
• High reliability

Fibre-fed repeaters for two-way radio systems. Optical fibre solution for indoor coverage and range extension in VHF, UHF and TETRA frequencies.

This design distributed antenna system (DAS) for in-building wireless radio coverage.

Typical Applications:

TETRA Fiber Optical Repeaters are mainly used in indoor area and outdoor areas already with optic fibers. The application of Tetra Fiber Optical repeaters will effectively eliminate the signal blind areas, enhance the network quality, improve the image of cellular operators and bring them more profit.They are widely used in the places below.

Railway Tube Scenery spot

Campus Hospital Oil field

Road Sea-route Town

Rural area Airport Venue

Electrical Specifications

Type	TETRA800	KT-ORDLB-( Refers to Output Power)
Frequency	TETRA800	UL:806-821MHz DL:851-866MHz
Output Power		33dBm	37dBm	40dBm		43dBm
Optic Output Power		2-5dBm
Receiving Optical Power(Min)		-15dBm
Optical Wavelength		UL:1310nm;DL:1550nm
Gain		65dB@0dB Optical Path Loss
Gain Adjust Range		≥30dB;1dB/step
AGC Range		≥25dB
IMD3		≤-13dBm	≤-45dBc
Noise Figure		≤5dB
Ripple in Band		≤3dB
Time Delay		≤10μs
Out Band Rejection		≤-40dBc @F(edge)±4MHz; ≤-60dBc @F(edge)±10MHz
Spurious Emission		9KHz-1GHz:≤-36dBm/30KHz;1GHz-12.75GHz:≤-30dBm/30KHz
Port Impedance		50Ω
VSWR		≤1.5
Monitoring Mode		Local;Remote(Optional)
Power Supply		AC220V(Normal); AC110V or DC48V or Solar Powered(Optional)
Power consumption		100W	150W		200W	250W

Mechanical Specifications

Weight	19kg	19kg	35kg	35kg
Dimension	590370250 mm		670420210 mm
Installation mode	Wall installation (normal);Pole installation(optional)
Connector	RF:N female; Optical:FC/APC

Environment Specifications

Case	IP65(Slave)
Temperature	-25~+55°C(Slave) 0°C~+55°C(Master)
Humidity	5%~95% (Slave)

The signal power is distributed using filters, splitters, attenuators, bi-directional amplifiers, discrete antennas and radiating cables, optical transceivers, low loss coax cables, and optical fibers…

More details, welcome to contact us freely! (www.kingtonerepeater.com )

Product detail pictures:

Related Product Guide:
What is MIMO?

We know that we only thrive if we can guarantee our combined price tag competiveness and top quality advantageous at the same time for Reasonable price Signal Booster Repeater 4g Lte - Cost-effective Band Selective Fibre Optical Repeater VHF, UHF,TETRA BDA (DAS) for in-building wireless radio coverage – Kingtone, The product will supply to all over the world, such as: Japan, Angola, Bulgaria, When you are keen on any of our goods following you view our product list, be sure to feel free to make contact with us for inquiries. You'll be able to send us emails and get in touch with us for consultation and we shall respond to you as soon as we're able to. If it's convenient, you could find out our address in our web site and come to our enterprise. or additional information of our products by yourself. We're generally ready to build lengthy and steady co-operation relations with any possible shoppers within the associated fields.

3g 2100 Signal Booster Amplifier Repeater Wcdma Booster