product_bg

UHF 400Mhz 2W Band Selective walkie talkie Repeater

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty 400M 2W Band Selective Repeaters(KT-CRP-B5-P33-B)     Kingtone Repeaters    kintone repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the are...


Product Detail

Product Tags

  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

400M 2W Band Selective RepeatersKT-CRP-B5-P33-B

    Kingtone Repeaters
   kintone repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive lowpower signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
 
 Telephone repeater
This is used to increase the range of telephone signals in a telephone line. They are most frequently used in trunklines that carry long distance calls. In an analog telephone line consisting of a pair of wires, it consists of an amplifier circuit made of transistors which use power from a DC current source to increase the power of the alternating current audio signal on the line. Since the telephone is a duplex (bidirectional) communication system, the wire pair carries two audio signals, one going in each direction. So telephone repeaters have to be bilateral, amplifying the signal in both directions without causing feedback, which complicates their design considerably. Telephone repeaters were the first type of repeater and were some of the first applications of amplification. The development of telephone repeaters between 1900 and 1915 made long distance phone service possible. However most telecommunications cables are now fiber optic cables which use optical repeaters (below).

Cellular repeater
This is a radio repeater for boosting cell phone reception in a limited area. The device functions like a small cellular base station, with a directional antenna to receive the signal from the nearest cell tower, an amplifier, and a local antenna to rebroadcast the signal to nearby cell phones. It is often used in downtown office buildings.                                                                                                                                                                                                                                                    
 

Mainfeature

Main Features of kingtone cellular repeater     
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

Application&scenarios

TETRA 400 repeater Applications
    To expand signal coverage of fill signal blind area where signal is weak  
or unavailable.
   Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
   Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
    The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;

    And can meet the requirement of antenna isolation to avoid self‐oscillation.
 border= 
 border= 
 border= 
 

Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency/customized

410 – 415MHz

420 – 425MHz

Gain(dB)

Nominal Output Power-5dB

80±3

Output Power (dBm)

 

33

33

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤6

Ripple in-band (dB)

Nominal Output Power -5dB

≤4.0

Time Delay (us)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Out of Band Gain

±400KHz

Nominal Output Power -5dB

≤50

±600KHz

Nominal Output Power -5dB

≤40

±1MHz

Nominal Output Power -5dB

≤35

±5MHz

Nominal Output Power -5dB

≤25

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty
warranty :1year for repeater ,6months for accessories

■ contat supplier ■ Solution&Application

  • *Model : KT-17P
    *Product Category : 65 °-17dBi base Panel directional antenna (824-960MHz/1710-2700MHz)

  • *Model : KT-G/DRP-B25/75-P43-B
    *Product Category : 20W High power outdoor repeater,43dbm GSM900/DCS1800 20W Wide band Repeater

  • *Model : KTWTI-7-08/2.5V-G
    *Product Category : G Indoor Directional Ceiling Antenna

  • *Model : KT-3G/B60-P10
    *Product Category : 10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier


  • Previous:
  • Next: