VHF 10W Bi-Directional Amplifier

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted...

Send email to us Download as PDF

Product Detail

Product Tags

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Mainfeature: Professional UHF 10W Bi-Directional Amplifier
Main Features
High linearity PA; High system gain;
Intelligent ALC technology;
Full duplex and high isolation from uplink to downlink;
Automatic Operation convenient operation;
Integrated technique with reliable performance;
Bandwidth can be configured from 0.2-25MHz in work band.
Local and remote monitoring (optional) with automatic fault alarm &remote control;
Weatherproof design for all-weather installation;

Application&scenarios

VHF Walkie Talkie repeater Applications
    To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
   Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
   Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
    The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;

And can meet the requirement of antenna isolation to avoid self‐oscillation.

Specification

Technical Specifications

Items		Testing Condition	Specification		Meno
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	146-150MHz	158-162 MHz	The frequency can be specified by customer
Bandwidth		Nominal Band	4MHz
Gain(dB)		Nominal Output Power-5dB	45±3
Output Power (dBm)		modulating signal	30	40
ALC (dBm)		Input Signal add 20dB	Po≤±1
Noise Figure (dB)		Working in-band(Max. Gain)	≤15
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power 5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C +55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty

12 month repeater 6month for accessories .

■ contat supplier ■ Solution&Application

*Model : KT-100-03
*Product Category : 100W RF Coaxial Attenuator
*Model : KT-IRP-B15-P37-B
*Product Category : 37dBm IDEN800 5W Band Selective Repeater
*Model : KT-DRP-B75-P37-B
*Product Category : 5W DCS1800MHz Band Selective Repeaters
*Model : KT-3G/B60-P10
*Product Category : 10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier